Package: te-agent-dbg Source: te-agent Version: 1.218.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 415993 Depends: te-agent (= 1.218.0-1~noble) Section: debug Priority: extra Description: ThousandEyes Core - debug symbols The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. . This package contains the debugging symbols for te-agent. Filename: pool/main/t/te-agent-dbg/te-agent-dbg_1.218.0-1~noble_amd64.deb SHA1: e820d3ccf85ec30e5f144937a20c6a9fdb8b0bd8 SHA256: ee8a0866ca079f38164c0444e893792995d372143bf7b281ed5423d9143b1d50 Size: 108972316 Package: te-agent Version: 1.218.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 27325 Depends: ca-certificates, libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.2.7+dfsg), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.10+dfsg~), libmnl0 (>= 1.0.3-4~), libsqlite3-0 (>= 3.6.5), libssh2-1t64 (>= 1.11.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Section: misc Priority: optional Description: ThousandEyes Core The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. Filename: pool/main/t/te-agent/te-agent_1.218.0-1~noble_amd64.deb SHA1: f1e9212585c06963087dde7d854edf5edea978af SHA256: 46c59779ea77f65ed5e6542292a8cba4ade45cbe3207caa0fd1d8fe27e6a2761 Size: 8515612 Package: te-agent-dbg Source: te-agent Version: 1.219.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 419816 Depends: te-agent (= 1.219.0-1~noble) Section: debug Priority: extra Description: ThousandEyes Core - debug symbols The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. . This package contains the debugging symbols for te-agent. Filename: pool/main/t/te-agent-dbg/te-agent-dbg_1.219.0-1~noble_amd64.deb SHA1: 10089627988fed69145af3089c8f30bafc50376d SHA256: 5a71694a48db24221c32348bf644d0b72afbeb9cd523dd105c7916181a37cc62 Size: 110056032 Package: te-agent Version: 1.219.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 27466 Depends: ca-certificates, libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.2.7+dfsg), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.10+dfsg~), libmnl0 (>= 1.0.3-4~), libsqlite3-0 (>= 3.6.5), libssh2-1t64 (>= 1.11.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Section: misc Priority: optional Description: ThousandEyes Core The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. Filename: pool/main/t/te-agent/te-agent_1.219.0-1~noble_amd64.deb SHA1: 1dc2527e3a825b752d75d952b5382ebcc84a6cae SHA256: 9db35ab98d0407dd452477daab67c3a5569a43202d54e4250ccd62b0f0d8547c Size: 8566918 Package: te-agent-dbg Source: te-agent Version: 1.220.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 417863 Depends: te-agent (= 1.220.0-1~noble) Section: debug Priority: extra Description: ThousandEyes Core - debug symbols The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. . This package contains the debugging symbols for te-agent. Filename: pool/main/t/te-agent-dbg/te-agent-dbg_1.220.0-1~noble_amd64.deb SHA1: 62b68db9c2d670ce2245059c72ff0993315714ad SHA256: 9907fba43c779716079ecf186e9dea0484ef7e0b75320aaea9bc9ef6c9861a1c Size: 109511396 Package: te-agent Version: 1.220.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 27299 Depends: ca-certificates, libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.2.7+dfsg), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.10+dfsg~), libmnl0 (>= 1.0.3-4~), libsqlite3-0 (>= 3.6.5), libssh2-1t64 (>= 1.11.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Section: misc Priority: optional Description: ThousandEyes Core The ThousandEyes Core package is a software agent that performs periodic, synthetic network measurements to predefined targets. Filename: pool/main/t/te-agent/te-agent_1.220.0-1~noble_amd64.deb SHA1: bc4d9dd9d1bee9e34e31b517ec14c365269ffc61 SHA256: 927757e35afd2a17710eb7c70d8e0ad308976c17ca6fe5bcb4f44040b64bdb9e Size: 8509262 Package: te-agent-utils-dbg Source: te-agent-utils Version: 1.60.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 461676 Depends: te-agent-utils (= 1.60.0-1~noble) Section: debug Priority: extra Description: ThousandEyes Agent Utilities - debug symbols Various stand-alone binaries that replicate the functionality of tests performed by ThousandEyes agents. . This package contains the debugging symbols for te-agent-utils. Build-Ids: 01e0577c3410185107c7d32e3d3308912ede20c9 13c28d5e8c441f54c23a4a05296771594213f2a8 1e95d3b2a29626b57418717198ee27b8fc04cfc5 275af09027c1f1b05e2fdd7523c0a07d7cf8e15f 51d844471598a29dc90aae05fba581e8e86578ab 6c34964c2eb006ae730dad1db9febb2ca964a3d6 70748eb684799cf675826779b01a6d24f5e54ab7 8bbd6f77e5cd5944716069074e97334c0e174059 a46f86809019a04cb4e4f7b099fdb5dae762bbe7 a89043599ca664702149267ff4ce66eebe562e48 a89862e68fae618e6e5614de35baa0d0241db2b4 bbbe8174244817faf0bdae79b6515535d5fdf952 c933edc6c23adadde857048056eba24b92782f94 d7d78cae53483c72618f0f9927918d8f468e26bf df442d71765122e3fe089ccd594effd6c6ff515a e310e629fb0c408c2448922aa4e8c17d3dcec64b Filename: pool/main/t/te-agent-utils-dbg/te-agent-utils-dbg_1.60.0-1~noble_amd64.deb SHA1: b14343da4cfa7aff1f905fe5f868d26f03bf13e6 SHA256: 992fdc576d70e1954be106e3c02fdf057340b721717e6c7395c48e263fdaa91d Size: 443856664 Package: te-agent-utils Version: 1.60.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 73319 Depends: libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.2.7+dfsg), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgcc-s1 (>= 3.4), libgssapi-krb5-2 (>= 1.17), libmnl0 (>= 1.0.3-4~), libssh2-1t64 (>= 1.11.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4) Section: misc Priority: optional Description: ThousandEyes Agent Utilities Various stand-alone binaries that replicate the functionality of tests performed by ThousandEyes agents. Filename: pool/main/t/te-agent-utils/te-agent-utils_1.60.0-1~noble_amd64.deb SHA1: b78cde026050f618a85c004a6c340b61954c661b SHA256: 8af8dc38436357e87c173e5cac3d3be39d06cc5fe4222b3bc60d363b97131678 Size: 10607616 Package: te-browserbot-dual Version: 3.14.0-1~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 957726 Depends: podman (>= 3.2.3), containernetworking-plugins (>= 0.9.0), crun (>= 0.12.1) Recommends: nftables Breaks: te-browserbot-cisco, te-sandboxd, te-txfs Replaces: te-browserbot-cisco, te-sandboxd, te-txfs Section: misc Priority: optional Description: ThousandEyes BrowserBot An extension to the ThousandEyes agent package that performs periodic measurements from a real browser. Filename: pool/main/t/te-browserbot-dual/te-browserbot-dual_3.14.0-1~noble_amd64.deb SHA1: 8fef58db5d557f191dd9eb396c81482c12bfefde SHA256: 1c4fc9a693b50610e17b34b30f97dbcdbd5a3514558aa15efb6318e7e3dfc779 Size: 959299236 Package: catatonit Version: 0.2.0-4~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 755 Section: admin Priority: optional Homepage: https://github.com/openSUSE/catatonit Description: init process for containers catatonic is a very simple init process for application containers. Its purpose is to support only the usage by container managers such as docker and podman, which is /dev/init -- . No other use cases will be supported. Filename: pool/main/c/catatonit/catatonit_0.2.0-4~noble_amd64.deb SHA1: 6ffa2b95906b2c580ee645b3f4f22eaf5590441a SHA256: bf95e6e1c46d03a542913c1c5b1ac4eafa838dd6cc4dd7022d2e2e95cd221b30 Size: 300970 Package: containernetworking-plugins Version: 1.6.0-4~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 59415 Depends: libc6 (>= 2.34) Conflicts: rkt Section: golang Priority: optional Homepage: https://github.com/containernetworking/plugins Description: standard networking plugins - binaries This package contains binaries of the Container Networking Initiative's official plugins: . Interfaces - bridge: Creates a bridge, adds the host and the container to it. - ipvlan: Adds an [ipvlan] interface in the container. - loopback: Set the state of loopback interface to up. - macvlan: Creates a new MAC address, forwards all traffic to that to the container. - ptp: Creates a veth pair. - vlan: Allocates a vlan device. - host-device: Move an already-existing device into a container. . IPAM: IP Address Management - dhcp: Runs a daemon to make DHCP requests on behalf of the container. - host-local: Maintains a local database of allocated IPs - static: Allocates a static IPv4/IPv6 address. . Other - flannel: Generates an interface corresponding to a flannel config file - tuning: Tweaks sysctl parameters of an existing interface - portmap: An iptables-based portmapping plugin. Maps ports from the host's address space to the container. - bandwidth: Allows bandwidth-limiting through use of traffic control tbf. - sbr: Configures source based routing for an interface. - firewall: Uses iptables or firewalld to add rules to allow traffic to/from the container. Filename: pool/main/c/containernetworking-plugins/containernetworking-plugins_1.6.0-4~noble_amd64.deb SHA1: b91528abdcfc3a2472534b6ae537242ff7d55b3c SHA256: 9f4420ca276b63768e3974ca77d5293dda17bd73cb10fb308b22c91911905663 Size: 8954214 Package: containers-common Version: 0.61.0-3~noble Architecture: all Maintainer: ThousandEyes Installed-Size: 138 Conflicts: skopeo-containers Replaces: containers-golang, containers-image, skopeo-containers Provides: skopeo-containers Section: devel Priority: optional Homepage: https://github.com/containers/common Description: Configuration files for working with image signatures. Filename: pool/main/c/containers-common/containers-common_0.61.0-3~noble_all.deb SHA1: 4a5b7a6d869337ad21fafc9476b90d2ca5539f21 SHA256: b94cce26d8356cfc5ee7f9e79f5ce672e37875487bfedf0d277aef885177e461 Size: 62370 Package: containers-common Version: 0.61.0-4~noble Architecture: all Maintainer: ThousandEyes Installed-Size: 138 Conflicts: skopeo-containers Replaces: containers-golang, containers-image, skopeo-containers Provides: skopeo-containers Section: devel Priority: optional Homepage: https://github.com/containers/common Description: Configuration files for working with image signatures. Filename: pool/main/c/containers-common/containers-common_0.61.0-4~noble_all.deb SHA1: 323b03e00ded3a84dc7601c984b09c6cde4aac7f SHA256: 109c408692e0017b0acb383ad24e9dd35d9bd8acf64e83dae8fedbccfe5051f9 Size: 62370 Package: conmon Version: 2.1.12-3~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 164 Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.77.0), libsystemd0 Section: admin Priority: optional Description: OCI container runtime monitor Conmon is a monitoring program and communication tool between a container manager (like podman or CRI-O) and an OCI runtime (like runc or crun) for a single container. . Upon being launched, it double-forks to daemonize and detach from the parent that launched it. It then launches the runtime as its child. This allows managing processes to die in the foreground, but still be able to watch over and connect to the child process (the container). . While the container runs, conmon does two things: . - Provides a socket for attaching to the container, holding open the container's standard streams and forwarding them over the socket. - Writes the contents of the container's streams to a log file (or to the systemd journal) so they can be read after the container's death. . Finally, upon the containers death, conmon will record its exit time and code to be read by the managing programs. . Written in C and designed to have a low memory footprint, conmon is intended to be run by a container managing library. Essentially, conmon is the smallest daemon a container can have. Filename: pool/main/c/conmon/conmon_2.1.12-3~noble_amd64.deb SHA1: 0b27ccbc65d7b209bba7f4c3108ad5466e4831b6 SHA256: 0826213702dff3f209403a018cd2f583070e589ec88e88653d9a7355fc3c317f Size: 35758 Package: conmon Version: 2.1.12-5~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 164 Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.77.0), libsystemd0 Section: admin Priority: optional Description: OCI container runtime monitor Conmon is a monitoring program and communication tool between a container manager (like podman or CRI-O) and an OCI runtime (like runc or crun) for a single container. . Upon being launched, it double-forks to daemonize and detach from the parent that launched it. It then launches the runtime as its child. This allows managing processes to die in the foreground, but still be able to watch over and connect to the child process (the container). . While the container runs, conmon does two things: . - Provides a socket for attaching to the container, holding open the container's standard streams and forwarding them over the socket. - Writes the contents of the container's streams to a log file (or to the systemd journal) so they can be read after the container's death. . Finally, upon the containers death, conmon will record its exit time and code to be read by the managing programs. . Written in C and designed to have a low memory footprint, conmon is intended to be run by a container managing library. Essentially, conmon is the smallest daemon a container can have. Filename: pool/main/c/conmon/conmon_2.1.12-5~noble_amd64.deb SHA1: 789b6199849f535193b8489f481fddf4a49dd0ae SHA256: 84018fdbd58a74defd4da2afc4292442f0d0dbd339ed5fb9c3e2e5096a639351 Size: 35758 Package: podman Version: 4.9.4-7~noble Architecture: amd64 Maintainer: ThousandEyes Installed-Size: 79758 Depends: libseccomp2 (>= 2.4.3-1), libdevmapper1.02.1, libgpgme11, catatonit, conmon (>= 2.0.24), containers-common, dbus-user-session, iptables, containernetworking-plugins (>= 0.9.1), crun (>= 0.12.1) Recommends: slirp4netns (>= 100:1.1.8-3), uidmap, fuse-overlayfs Conflicts: podman-rootless Section: devel Priority: optional Description: Manage pods, containers and container images. Filename: pool/main/p/podman/20250730-214233/podman_4.9.4-7~noble_amd64.deb SHA1: 284d04a5b48f7a9e9c957200a8ba7558defc9610 SHA256: 10565dc1ac629af91a6c63a959e156c6a2dfe8c9ded94fb84ae0a43886bfb075 Size: 24773224